Site Map
- Ashley Iles (Edge Tools) Ltd.
- Back Bent Chisels (Sweep No.33x1)
- Back Bent Gouges (Sweep No.33)
- Back Bent Gouges (Sweep No.33x2.5)
- Back Bent Gouges (Sweep No.34)
- Back Bent Gouges (Sweep No.35)
- Back Bent Gouges (Sweep No.36)
- Back Bent Gouges (Sweep No.37)
- Back Bent Gouges (Sweep No.38)
- Blockcutter Back Bent V-Tool (Sweep No.48BC)
- Blockcutter Back Bent V-Tool (Sweep No.53BC)
- Blockcutter Curved Chisel (Sweep No.12x1BC)
- Blockcutter Curved Corner Chisel (Sweep No.12x2ABC)
- Blockcutter Curved Corner Chisel (Sweep No.12x2BBC)
- Blockcutter Curved Gouge (Sweep No.12BC)
- Blockcutter Curved Gouge (Sweep No.12x2.5BC)
- Blockcutter Curved Gouge (Sweep No.14BC)
- Blockcutter Curved Gouge (Sweep No.15BC)
- Blockcutter Curved Gouge (Sweep No.16BC)
- Blockcutter Curved Gouge (Sweep No.18BC)
- Blockcutter Curved V-Tool (Sweep No.40BC)
- Blockcutter Curved V-Tool (Sweep No.42BC)
- Blockcutter Dog-Leg Chisel (Sweep No.52BC
- Blockcutter Single Angle Dog-Leg (Sweep No.51BC)
- Blockcutter Straight Chisel (Sweep No.1BC)
- Blockcutter Straight Corner Chisel (Sweep No. 2ABC)
- Blockcutter Straight Corner Chisel (Sweep No. 2BBC)
- Blockcutter Straight Gouge (Sweep No.2.5BC)
- Blockcutter Straight Gouge (Sweep No.3BC)
- Blockcutter Straight Gouge (Sweep No.5BC)
- Blockcutter Straight Gouge (Sweep No.6BC)
- Blockcutter Straight Gouge (Sweep No.7BC)
- Blockcutter Straight Gouge (Sweep No.9BC)
- Blockcutter Straight V-Tool (Sweep No.39BC)
- Blockcutter Straight V-Tool (Sweep No.41BC)
- Curved Chisel (Sweep No.12x1)
- Curved Corner Chisel (Sweep No.12x2A - Right Corner)
- Curved Corner Chisel (Sweep No.12x2B - Left Corner)
- Curved Gouges ( Sweep No.12)
- Curved Gouges (Sweep No.12 x 2 1/2)
- Curved Gouges (Sweep No.13)
- Curved Gouges (Sweep No.14)
- Curved Gouges (Sweep No.15)
- Curved Gouges (Sweep No.16)
- Curved Gouges (Sweep No.17)
- Curved Gouges (Sweep No.18)
- Curved Gouges (Sweep No.19)
- Curved Gouges (Sweep No.20)
- Fishtail Chisel (Sweep No.54)
- Fishtail Corner Chisels (Sweep No.54x2)
- Fishtail Gouges (Sweep No.54x10)
- Fishtail Gouges (Sweep No.54x11)
- Fishtail Gouges (Sweep No.54x2.5)
- Fishtail Gouges (Sweep No.54x3)
- Fishtail Gouges (Sweep No.54x4)
- Fishtail Gouges (Sweep No.54x5)
- Fishtail Gouges (Sweep No.54x6)
- Fishtail Gouges (Sweep No.54x7)
- Fishtail Gouges (Sweep No.54x8)
- Fishtail Gouges (Sweep No.54x9)
- Chris Pye Finishing Gouges (Sweep No.2.5CP)
- Dog-Leg Chisel (Sweep No.52)
- Grounding Tool (Sweep No.47)
- Side Bent V-Tool Blockcutters
- Single Angle Dog-Leg Chisels (Sweep No.51)
- Short Carving Hooked Skew
- Set of 12 Zoe Gertner Lightweight Chisels
- Straight Corner Chisels (Sweep No.2ZG)
- Straight Gouge (Sweep No.3ZG)
- Straight Gouge (Sweep No.5ZG)
- Straight Gouge (Sweep No.9ZG)
- Straight V-Tool (Sweep No.39ZG)
- Spoon Gouges (Sweep No.31)
- Spoon Chisels (Sweep No.21)
- Spoon Chisels (Sweep No.22) Right Corner
- Spoon Chisels (Sweep No.23) Left Corner
- Spoon Gouges (Sweep No. 27)
- Spoon Gouges (Sweep No.23 1/2)
- Spoon Gouges (Sweep No.24)
- Spoon Gouges (Sweep No.25)
- Spoon Gouges (Sweep No.26)
- Spoon Gouges (Sweep No.28)
- Spoon Gouges (Sweep No.29)
- Spoon Gouges (Sweep No.30)
- Spoon Gouges (Sweep No.32)
- Straight Chisel (Sweep No.1)
- Straight Corner Chisel (Sweep No.2)
- Straight Gouge (Sweep No.10)
- Straight Gouge (Sweep No.11)
- Straight Gouge (Sweep No.2 1/2)
- Straight Gouge (Sweep No.3)
- Straight Gouge (Sweep No.4 )
- Straight Gouge (Sweep No.5)
- Straight Gouge (Sweep No.6)
- Straight Gouge (Sweep No.7)
- Straight Gouge (Sweep No.8)
- Straight Gouge (Sweep No.9)
- Curved Round Bottom V-Tool (Sweep No.50)
- Curved V-Tool (Sweep No.40)
- Curved V-Tool (sweep No.42)
- Curved V-Tool (Sweep No.46)
- Spoon V-Tool (Sweep No.43)
- Straight Round Bottom V-Tool (Sweep No.49)
- Straight V-Tool (Sweep No.39)
- Straight V-Tool (Sweep No.41)
- Straight V-Tool (Sweep No.45)
- Ashley Iles - Bevel Edged Chisels
- Ashley Iles - Butt Chisels
- Bead Forming Tools (various sizes available)
- Beading and Parting Tools (various sizes available)
- Bedan (various sizes available)
- Diamond Parting Tool - 3/16"
- Flared Parting Tool - 3/16"
- Fluted Parting Tool - 3/16"
- Mike Tingey Beading and Parting Tools (various sizes available)
- Negative Rake Parting Tool - 3/16"
- Standard Parting Tool (various sizes available)
- Ultra Thin Parting Tool - 1/16"
- Pointy Tools (various sizes available)
- Captive Ring Tool 3/8"
- Fixed Angle Ring Tool
- Traditional Ring Tool
- Box Scraper
- Double Ended Scraper Bar
- Heavy Duty Scrapers
- Mike Tingey Shear Scrapers (various sizes available)
- Reg Sherwin Shear Scraper 5/8"
- Side Scrapers Type A
- Side Scrapers Type B
- Side Scrapers Type C
- Side Scrapers Type D
- Standard Domed Scrappers
- Standard Radius Scrapers
- Standard Round Nose Scrappers
- Standard Straight Scrapers
- Tobias Kaye Shear Scraper
- Flat Section Double Bevel Square End Chisels
- Flat Section Radius Edge Skew Chisels
- Flat Section Skew Chisels
- Round Section Skew Chisels
- Square Section Skew Chisel
- Elliptical Spindle Tools (various sizes available)
- Martin Pidgen's All Rounder
- Phil Reardon's Cork Handled Turing Tools
- Bowl Gouges
- Continental Gouge Short (various sizes available)
- 'Half Round' Spindle Roughing Out Gouges (various Sizes available)
- Mario Rodriguez Shallow Sweep 3-in-1 Turning Tool
- Reg Sherwin's Roughing Out Gouges (various sizes available)
- Round Bar Spindle Gouge Long and Strong (1/2")
- Round Bar Spindle Gouges (various sizes available)
- Traditional Pattern Spindle Gouges (various sizes available)
- Ashley Iles Ferret Pole Lathe Tool
- Set of 5 Ashley Iles Pole Lathe Tools
- Shallow Roughing Out Gouge 1-1/2" Pole Lathe Tool
- Skew Chisel 3/4" Pole Lathe Tool
- Spindle Gouge 3/8" Pole Lathe Tool
- Square Chisel 2" Pole Lathe Tool
- Ashley Iles - Beading and Parting Tools
- Flared Parting Tool - 3/16"
- Standard Parting Tool (various sizes available)
- Fluted Parting Tool - 3/16"
- Beading and Parting Tools (various sizes available)
- Bedan (various sizes available)
- Diamond Parting Tool - 3/16"
- Negative Rake Parting Tool - 3/16"
- Ultra Thin Parting Tool - 1/16"
- Mike Tingey Beading and Parting Tools (various sizes available)
- Bead Forming Tools (various sizes available)
- Ashley Iles - Blockcutters
- Blockcutter Straight Chisel (Sweep No.1BC)
- Blockcutter Straight Corner Chisel (Sweep No. 2ABC)
- Blockcutter Straight Corner Chisel (Sweep No. 2BBC)
- Blockcutter Straight Gouge (Sweep No.2.5BC)
- Blockcutter Straight Gouge (Sweep No.3BC)
- Blockcutter Straight Gouge (Sweep No.5BC)
- Blockcutter Straight Gouge (Sweep No.6BC)
- Blockcutter Straight Gouge (Sweep No.7BC)
- Blockcutter Straight Gouge (Sweep No.9BC)
- Blockcutter Straight V-Tool (Sweep No.39BC)
- Blockcutter Straight V-Tool (Sweep No.41BC)
- Blockcutter Curved Gouge (Sweep No.12BC)
- Blockcutter Curved Gouge (Sweep No.12x2.5BC)
- Blockcutter Curved Chisel (Sweep No.12x1BC)
- Blockcutter Curved Corner Chisel (Sweep No.12x2ABC)
- Blockcutter Curved Corner Chisel (Sweep No.12x2BBC)
- Blockcutter Curved Gouge (Sweep No.14BC)
- Blockcutter Curved Gouge (Sweep No.15BC)
- Blockcutter Curved Gouge (Sweep No.16BC)
- Blockcutter Curved Gouge (Sweep No.18BC)
- Blockcutter Curved V-Tool (Sweep No.40BC)
- Blockcutter Curved V-Tool (Sweep No.42BC)
- Blockcutter Back Bent V-Tool (Sweep No.48BC)
- Blockcutter Single Angle Dog-Leg (Sweep No.51BC)
- Blockcutter Dog-Leg Chisel (Sweep No.52BC
- Blockcutter Back Bent V-Tool (Sweep No.53BC)
- Ashley Iles - Curved Chisels & Gouges
- Curved Chisel (Sweep No.12x1)
- Curved Corner Chisel (Sweep No.12x2A - Right Corner)
- Curved Gouges (Sweep No.12 x 2 1/2)
- Curved Gouges ( Sweep No.12)
- Curved Corner Chisel (Sweep No.12x2B - Left Corner)
- Curved Gouges (Sweep No.13)
- Curved Gouges (Sweep No.14)
- Curved Gouges (Sweep No.15)
- Curved Gouges (Sweep No.16)
- Curved Gouges (Sweep No.17)
- Curved Gouges (Sweep No.18)
- Curved Gouges (Sweep No.19)
- Curved Gouges (Sweep No.20)
- Ashley Iles - Fishtail Chisels & Gouges
- Fishtail Chisel (Sweep No.54)
- Fishtail Corner Chisels (Sweep No.54x2)
- Fishtail Gouges (Sweep No.54x2.5)
- Fishtail Gouges (Sweep No.54x3)
- Fishtail Gouges (Sweep No.54x4)
- Fishtail Gouges (Sweep No.54x5)
- Fishtail Gouges (Sweep No.54x6)
- Fishtail Gouges (Sweep No.54x7)
- Fishtail Gouges (Sweep No.54x8)
- Fishtail Gouges (Sweep No.54x9)
- Fishtail Gouges (Sweep No.54x10)
- Fishtail Gouges (Sweep No.54x11)
- Ashley Iles - Scrapers
- Standard Straight Scrapers
- Standard Domed Scrappers
- Standard Radius Scrapers
- Standard Round Nose Scrappers
- Heavy Duty Scrapers
- Side Scrapers Type A
- Side Scrapers Type B
- Side Scrapers Type C
- Side Scrapers Type D
- Reg Sherwin Shear Scraper 5/8"
- Mike Tingey Shear Scrapers (various sizes available)
- Tobias Kaye Shear Scraper
- Double Ended Scraper Bar
- Box Scraper
- Ashley Iles - Spoon Chisels & Gouges
- Spoon Chisels (Sweep No.21)
- Spoon Chisels (Sweep No.22) Right Corner
- Spoon Chisels (Sweep No.23) Left Corner
- Spoon Gouges (Sweep No.23 1/2)
- Spoon Gouges (Sweep No.24)
- Spoon Gouges (Sweep No.25)
- Spoon Gouges (Sweep No.26)
- Spoon Gouges (Sweep No. 27)
- Spoon Gouges (Sweep No.28)
- Spoon Gouges (Sweep No.29)
- Spoon Gouges (Sweep No.30)
- Spoon Gouges (Sweep No.31)
- Spoon Gouges (Sweep No.32)
- Ashley Iles - Straight Chisels & Gouges
- Straight Chisel (Sweep No.1)
- Straight Corner Chisel (Sweep No.2)
- Straight Gouge (Sweep No.2 1/2)
- Straight Gouge (Sweep No.3)
- Straight Gouge (Sweep No.4 )
- Straight Gouge (Sweep No.5)
- Straight Gouge (Sweep No.6)
- Straight Gouge (Sweep No.7)
- Straight Gouge (Sweep No.8)
- Straight Gouge (Sweep No.9)
- Straight Gouge (Sweep No.10)
- Straight Gouge (Sweep No.11)
- Ashley Iles - Turning Gouges
- 'Half Round' Spindle Roughing Out Gouges (various Sizes available)
- Traditional Pattern Spindle Gouges (various sizes available)
- Continental Gouge Short (various sizes available)
- Mario Rodriguez Shallow Sweep 3-in-1 Turning Tool
- Reg Sherwin's Roughing Out Gouges (various sizes available)
- Round Bar Spindle Gouges (various sizes available)
- Round Bar Spindle Gouge Long and Strong (1/2")
- Bowl Gouges
- Block Planes
- Quangsheng Standard Angle Block Plane
- Quangsheng Low Angle Block Plane
- Quangsheng Rebating Block Plane
- Lie Nielsen Low Angle Skew Block Plane with Nicker (Right Handed)
- Record No.9 1/2 Block Plane
- Stanley No.9 1/2 Block Plane
- Veritas Skew Block Plane
- Veritas Low Angle Block Plane
- Veritas Standard Angle Block Plane
- Veritas DX60 Block Plane
- Record No.04 Bench Plane
- Bushcraft and Survival Knives
- 6" Bowie Knife
- 6" Bowie Knife Kit
- Stainless Steel Seamans Knife
- Survival Knife (M.O.D Specification)
- Mora Knives Bushcraft Forest
- Mora Knives Companion Carbon Steel MG
- Mora Knives Companion Heavy Duty (MG)
- Mora Knives Companion Stainless Steel MG
- Condor Bushlore Knife (4.3")
- Condor Village Parang Knife
- Condor Mini Bushlore 3"
- Hultafors Safety Knife
- Hultafors Craftsman's Knife RFR
- Ghillie Kettle
- Aluminium Ghillie Kettle (Various Sizes Available)
- Aluminium Ghillie Kettle FULL KIT (Various Sizes Available)
- Hard Anodised Ghillie Kettles (Various Sizes Available)
- Hard Anodised Ghillie Kettles FULL KIT (Various Sizes Available)
- mKettle
- Silver Anodised Ghillie Kettles FULL KIT (Various Sizes Available)
- Silver Anodised Gillie Kettles (Various Sizes Available)
- Ghillie Kettles and Accessories
- Hard Anodised Ghillie Kettles (Various Sizes Available)
- Hard Anodised Ghillie Kettles FULL KIT (Various Sizes Available)
- Silver Anodised Gillie Kettles (Various Sizes Available)
- Silver Anodised Ghillie Kettles FULL KIT (Various Sizes Available)
- Aluminium Ghillie Kettle (Various Sizes Available)
- Aluminium Ghillie Kettle FULL KIT (Various Sizes Available)
- mKettle
- Handles, Shafts and Ferrules
- Ash Double Hooped Handle (various sizes available)
- Beech Carver Pattern Handles (various sizes available)
- Rosewood Carver Pattern Handles (various sizes available)
- Boxwood London Pattern Handles (various sizes available)
- Beech Turning Tool Handles (various sizes available)
- Caulked Billhook Handle
- Round Billhook Handle
- 14" Yorkshire Pattern Billhook Handle
- 36" Hickory Slasher Shaft
- 36" Hickory Adze Shaft
- Hickory Felling Axe Shafts (various sizes available)
- Brass Ferrules
- Handle and Knob Set
- Smedbergs Curved Hickory Axe Shafts (various sizes available)
- Steel Wedges (various sizes available)
- Wooden Wedges (various sizes available)
- Hultafors
- Hultafors - Felling Axe HY 10
- Hultafors - Hunting Axe, Classic
- Hultafors Classic Double Bit Throwing Axe
- Hultafors - Trekking Axe MINI Classic
- Hultafors - Chopping Axe HY 20
- Hultafors Safety Knife
- Hultafors Craftsman's Knife RFR
- Hultafors - Trekking Axe Classic
- Hultafors Carpenter’s Axe Classic
- Hultafors Sledge Splitting Axe
- Splitting Axe KLY RA
- Miniature Planes
- Veritas Miniature Edge Plane
- Veritas Miniature Shoulder Plane
- Veritas Miniature Router Plane
- Set of Three Veritas Miniature Planes
- Veritas Miniature Spokeshave
- Veritas Detail Palm Planes
- Veritas Miniature Low Angle Block Plane
- Veritas Detail Rebate Plane
- Veritas Miniature Bench Plane
- Kunz 101 Pocket
- Kunz 100 Pocket Plane
- Veritas Inset Plane
- Morris of Dunsford
- Morris of Dunsford Devon Pattern Billhook
- Morris of Dunsford Knighton Pattern Billhook
- Morris of Dunsford Newtown Pattern Billhook
- Morris of Dunsford Spar Hook
- Morris of Dunsford Stick Chopper
- Morris of Dunsford Suffolk Pattern Billhook
- Morris of Dunsford Tenterden Pattern Billhook
- Morris of Dunsford Yorkshire Pattern Billhook
- Morris of Dunsford Bark Peeler - Large
- Morris of Dunsford Bark Peeler - Small
- Morris of Dunsford Billhooks
- Morris of Dunsford Devon Pattern Billhook
- Morris of Dunsford Newtown Pattern Billhook
- Morris of Dunsford Knighton Pattern Billhook
- Morris of Dunsford Tenterden Pattern Billhook
- Morris of Dunsford Spar Hook
- Morris of Dunsford Suffolk Pattern Billhook
- Morris of Dunsford Yorkshire Pattern Billhook
- Morris of Dunsford Stick Chopper
- Morris Billhook Sheath (Available in different Patterns)
- Ray Iles
- 1/2" x 9" Ray Iles Drawbore Pins
- 3/8" x 7" Ray Iles Drawbore Pins
- Mike Abbott Pattern Drawknife
- Ray Iles Gent's Drawknife
- Ray Iles Large Drawknife
- Ray Iles Scorp / Inshave
- Ray Iles Small Drawknife
- Ray Iles Straight Drawknife
- Ray Iles Large Froe
- Ray Iles Micro Froe
- Ray Iles Premium Froe
- Ray Iles Small Froe
- Ray Iles XL Froe
- Ray Iles XL Froe With Sheath
- Large Beech Carving Mallet
- Lignum Vitae Mallet
- Small Beech Carving Mallet
- 14" Yorkshire Pattern Billhook Handle
- 36" Hickory Adze Shaft
- 36" Hickory Slasher Shaft
- Ash Double Hooped Handle (various sizes available)
- Beech Carver Pattern Handles (various sizes available)
- Beech Turning Tool Handles (various sizes available)
- Boxwood London Pattern Handles (various sizes available)
- Caulked Billhook Handle
- Hickory Felling Axe Shafts (various sizes available)
- Rosewood Carver Pattern Handles (various sizes available)
- Handle and Knob Set
- Round Billhook Handle
- Ray Iles - Deep Curve Crook Knife
- Ray Iles - Shallow Curve Crook Knife
- Ray Iles - Traditional Crook Knife (Large)
- Ray Iles - Traditional Crook Knife (Small)
- Ray Iles - Whittling Knife
- Plane Iron RI004 - Stanley and Record No. 9 1/2, 9 3/4, 15, 15 1/2, 16, 17, 18, 19, 118, 220, A18
- Replacement Adjustable Block Plane Iron RI003M - To fit the latest Stanley No. 60 1/2
- Replacement Adjustable Block Plane Iron RI004M - To fit the latest Stanley No. 9 1/2
- Adjustable Spoke Shave Iron RI010A - Stanley No. 151, 151M, 151R, 152; and Record A151, A151R, 0151R
- Replacement Bench Plane Iron 1 3/4" RI020 - Stanley No. 3; Record 03; and Bedrock equivalents
- Replacement Bench Plane Iron 2 1/4" RI022 - Stanley No. 5 1/2's and Record 05 1/2's
- Bench Plane Iron 2 3/8" RI023 - Stanley No. 4 1/2, 5 1/2, 6, 7; Record 04 1/2, 15 1/2, 06, 07;
- Replacement Bench Plane Iron 2 5/8" RI024 - To Fit Stanley No. 8; Record 08; and Bedrock 608
- Replacement Bench Plane Iron 2" RI021 - Stanley No. 4, 5; Record 04, 05; and Bedrock equivalents
- Replacement Block Plane Iron RI003A - To fit Stanley 60 1/2A adjustable block plane
- Replacement Block Plane Iron RI003 - To fit Stanley No. 60, 60 1/2, 61, 103
- Replacement Block Plane Toothing Iron RI003MT - To fit the latest Stanley No. 60 1/2
- Replacement Block Plane Toothing Iron RI004MT - To fit the latest Stanley No. 9 1/2
- Replacement Non-adjustable Spoke Shave Iron RI010 - Stanley No. 51, 52; and Record 051, 052
- Replacement Plane Iron RI008 - To fit Record 041 adjustable shoulder plane iron
- Replacement Plane Iron RI002 - To fit Record 072 and Preston equivalent shoulder plane iron
- Replacement Plane Iron RI005 - To fit Record 073 shoulder plane iron
- Replacement Plane Iron RI006 - To fit Record 076 and Preston's equivalent plane iron
- Replacement Plane Iron RI007 - To fit Record 077, 077A, 311; and Preston's equivalent plane iron
- Replacement Plane Iron RI015 - To fit Record 778 rebate plane
- Replacement Plane Iron RI001 - Stanley No. 10, 10 1/4, 10 1/2; and Record 010, 010 1/2 plane iron
- RI010B Replacement Stanley 53, 54 Adjustable Mouth Spoke Shave Iron
- Replacement Toothing Iron RI003T - To fit Stanley No. 60, 60 1/2, 61, 103
- Set of Eight Cutters RI013 - To fit Stanley No. 66 beading plane, as per original pattern
- Eight Cutters RI012 (1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" & 9/16") - Record 044 plough
- Set of Three Cutters RI011 (1/8", 3/16" & 1/4") - To fit Record 043 plough plane
- Toothing Iron RI004T- Stanley and Record Planes
- Ray Iles Rounding Planes (various sizes available)
- Ray Iles - Shave Horse
- Ray Iles Shave Horse + Mike Abbot Drawknife + Free P&P
- Large drawknife sheath
- Morris Billhook Sheath (Available in different Patterns)
- Small drawknife sheath
- Ray Iles Travisher
- Ray Iles Tine Cutter
- Ray Iles Twybill
- Record Tools
- Record No. 03 Bench Plane
- Record No.020C Compass Plane
- Record No.041 Shoulder Plane
- Record No.042 Shoulder Plane
- Record No.072 Shoulder Plane
- Record No.073 Shoulder Plane
- Record No.9 1/2 Block Plane
- Record No.T5 Technical Jack Plane
- Record No.05 1/2 Jack Plane
- Record Smoothing Plane No.04 1/2
- Record No.8 Jointer Plane
- Record No.52 - 7" Quick Release Vice
- Replacement Plane Irons
- Replacement Plane Iron RI001 - Stanley No. 10, 10 1/4, 10 1/2; and Record 010, 010 1/2 plane iron
- Replacement Plane Iron RI002 - To fit Record 072 and Preston equivalent shoulder plane iron
- Replacement Block Plane Iron RI003 - To fit Stanley No. 60, 60 1/2, 61, 103
- Replacement Toothing Iron RI003T - To fit Stanley No. 60, 60 1/2, 61, 103
- Replacement Block Plane Iron RI003A - To fit Stanley 60 1/2A adjustable block plane
- Replacement Adjustable Block Plane Iron RI003M - To fit the latest Stanley No. 60 1/2
- Replacement Block Plane Toothing Iron RI003MT - To fit the latest Stanley No. 60 1/2
- Plane Iron RI004 - Stanley and Record No. 9 1/2, 9 3/4, 15, 15 1/2, 16, 17, 18, 19, 118, 220, A18
- Toothing Iron RI004T- Stanley and Record Planes
- Replacement Adjustable Block Plane Iron RI004M - To fit the latest Stanley No. 9 1/2
- Replacement Block Plane Toothing Iron RI004MT - To fit the latest Stanley No. 9 1/2
- Replacement Plane Iron RI005 - To fit Record 073 shoulder plane iron
- Replacement Plane Iron RI006 - To fit Record 076 and Preston's equivalent plane iron
- Replacement Plane Iron RI007 - To fit Record 077, 077A, 311; and Preston's equivalent plane iron
- Replacement Plane Iron RI008 - To fit Record 041 adjustable shoulder plane iron
- RI010B Replacement Stanley 53, 54 Adjustable Mouth Spoke Shave Iron
- Replacement Non-adjustable Spoke Shave Iron RI010 - Stanley No. 51, 52; and Record 051, 052
- Adjustable Spoke Shave Iron RI010A - Stanley No. 151, 151M, 151R, 152; and Record A151, A151R, 0151R
- Set of Three Cutters RI011 (1/8", 3/16" & 1/4") - To fit Record 043 plough plane
- Eight Cutters RI012 (1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" & 9/16") - Record 044 plough
- Set of Eight Cutters RI013 - To fit Stanley No. 66 beading plane, as per original pattern
- Replacement Plane Iron RI015 - To fit Record 778 rebate plane
- Replacement Bench Plane Iron 1 3/4" RI020 - Stanley No. 3; Record 03; and Bedrock equivalents
- Replacement Bench Plane Iron 2" RI021 - Stanley No. 4, 5; Record 04, 05; and Bedrock equivalents
- Replacement Bench Plane Iron 2 1/4" RI022 - Stanley No. 5 1/2's and Record 05 1/2's
- Bench Plane Iron 2 3/8" RI023 - Stanley No. 4 1/2, 5 1/2, 6, 7; Record 04 1/2, 15 1/2, 06, 07;
- Replacement Bench Plane Iron 2 5/8" RI024 - To Fit Stanley No. 8; Record 08; and Bedrock 608
- Stanley RB108 - Set of 15 replacement blades
- Replacement Iron to fit RI009 - Preston adjustable Spokeshave (without lateral adjustment)
- Replacement Iron to fit RI009A - Preston adjustable Spokeshave (with lateral adjustment)
- Replacement Cap Iron
- Saws and Accessories
- G-Man Bow Saw 21"
- G-Man Bow Saw 24"
- G-Man Bow Saw 30"
- Opinel No.12 Folding Saw Knife
- Opinel No.18 Folding Saw
- Berger Garden Saw No. 64750
- The Gramercy Tools 9" Dovetail Saw
- The Gramercy Tools 12" Carcase Saw
- The Gramercy Tools 14" Sash Saw
- Paramo Saw Vice No.2
- Paramo 1944 Saw Vice
- Wentworth's No.1 Saw Vice
- Thomas Flinn Pax 1776 Tenon Saw 10" with display box
- Shoulder and Bullnose Planes
- Clifton 400 Shoulder Rebate Plane (Cutter 3/8" wide)
- Clifton 410 Shoulder Rebate Plane (Cutter 5/8" wide)
- Clifton 420 Shoulder Rebate Plane (Cutter 3/4" wide)
- Record No.041 Shoulder Plane
- Record No.042 Shoulder Plane
- Record No.072 Shoulder Plane
- Record No.073 Shoulder Plane
- Stanley No.78 Duplex Rabbet Plane
- Stanley No.78 Duplex Rabbet Plane (without fence)
- Stanley
- Stanley No.04 Bench Plane
- Stanley Hand Drill 03-103 (Double Pinion)
- Stanley No.271 Router Plane
- Stanley RB108 - Set of 15 replacement blades
- Stanley No.72 Chamfer Plane
- Stanley No.6 Bailey Bench Plane
- Stanley Bailey No.05
- Stanley Bailey No.07 Jointer Plane
- Stanley No.78 Duplex Rabbet Plane
- Stanley No.78 Duplex Rabbet Plane (without fence)
- Stanley No.9 1/2 Block Plane
- Stanley No. 2 Bench Plane
- Used and Collectable Planes
- Record No.041 Shoulder Plane
- Record No.042 Shoulder Plane
- Record No.072 Shoulder Plane
- Record No.073 Shoulder Plane
- Record No. 03 Bench Plane
- Record No.T5 Technical Jack Plane
- Stanley No.04 Bench Plane
- Stanley No.72 Chamfer Plane
- Record No.020C Compass Plane
- Record No.9 1/2 Block Plane
- Stanley No.271 Router Plane
- Lie Nielsen Low Angle Skew Block Plane with Nicker (Right Handed)
- Record No.05 1/2 Jack Plane
- Stanley No.6 Bailey Bench Plane
- Record Smoothing Plane No.04 1/2
- Record No.8 Jointer Plane
- Stanley Bailey No.05
- Stanley Bailey No.07 Jointer Plane
- Stanley No.78 Duplex Rabbet Plane
- Stanley No.78 Duplex Rabbet Plane (without fence)
- Stanley No.9 1/2 Block Plane
- Record No.71 Router Plane
- Record No.405 Multi-Plane
- Record No.04 Bench Plane
- Millers Falls No.77 Router Plane
- Stanley No. 2 Bench Plane
- Set of 4 Preston Wooden Moulding Planes
- Set of 6 Tyzack Wooden Moulding Planes
- Veritas
- 'Adirondack Plus' Porch Seat and Footstool Plan
- Folding Chair Plan
- Veritas Workbench Plans
- Set of Three Veritas Miniature Planes
- Veritas Detail Palm Planes
- Veritas Miniature Edge Plane
- Veritas Miniature Low Angle Block Plane
- Veritas Miniature Router Plane
- Veritas Miniature Shoulder Plane
- Veritas Miniature Spokeshave
- Veritas Dowel Cutters
- Veritas Mini Tenon Cutters
- Veritas Power Tenon Cutters
- Veritas Tapered Tenon Cutters
- Veritas Super-Hard Curved Srapers
- Honing Compound
- Veritas Chair Devils (various sizes available)
- Veritas Spokeshaves (various sizes available)
- Veritas Detail Rebate Plane
- Veritas Miniature Bench Plane
- Veritas Miniature Cabinet Scraper
- Veritas Honing Guide Mk.II
- Veritas Inset Plane
- Veritas Skew Block Plane
- Veritas Low Angle Block Plane
- Veritas Standard Angle Block Plane
- Veritas DX60 Block Plane
- Miniature Bench Chisels
- Veritas Pullshave
« Back
© The Old Tool Store. All Rights Reserved.
